Brass Electrical Wiring Accessories
 
Brass Cable Gland Accessories
   
CABLE GLAND PACKS
Cable Gland packs upto and including M32 contains the necessary components to effect two terminations while packs M40 and above effects one termination.
All packs are manufactured to BS6121. A termination is completed using a Brass Cable Gland steel lock nut (Zinc plated), Brass Earth Tag and a Black PVC Shroud.
Sizes Available: M20S to M75

CABLE GLAND ACCESSORIES
EARTH TAGS - Manufactured in Brass to suit all Brass Glands from M16 to M75. They provide a means of connection, or an Earth Bond, at any position around the Gland satisfying BS6121 requirements.

LOCK NUTS - Manufactured in Brass suitable to all Brass Glands from M16 to M75 to secure the gland to an enclosure. These are outside the scope of BS 6121.

PVC SHROUDS
Black Polyvinylchloride - PVC - Shrouds offer a simple and effective solution where weather and corrosion protection of a Cable Gland is required It will also enhance the IP rating of a termination. Available to suit all types and sizes of glands.

BRASS BUSHES
Used where conduit tube ends and Cable enters an adaptable box to ensure a secure fit and smooth passage. Females are internally threaded whereas males are externally threaded and available as Long or Short Patterns.
Sizes Available: M16 to M32 and 3/4" TO 2"

TRS GLANDS
Suitable for use with SWA, Co-Axial or rubber sheathed cables to provide a tight fit against the cable when tightened
Sizes Available: M16/20 to M32

Back
 
Conduit Fittings
BRASS NICKLE PLATED ADAPTORS
Available in Single Core and Joint
Sizes Available : S-16 to S-50, C-16 to C-50 & 5/8" to 2"

BRASS NICKLE PLATED ADAPTORS
Available in Single Core and Joint
Sizes Available : S-16 to S-50, C-16 to C-50 & 5/8" to 2"

BRASS STOP PLUGS
A CIRCULAR, SLOTTED, EXTERNAL THREADED BLANKING PLUG.
SIZES AVAILABLE: M20 TO M32

BRASS CLAMP
EARTHING BAND CLIPS

BRASS SPLIT BOLT CONNECTOR-LINE TAPS
BRASS LINE TAPS ARE MADE WITH HIGH TENSILE BRASS. PESSURE PADS ARE MADE FROM EXTRUDED BARS TO PREVENT PADS FROM CRACKING. AVAILABLE IN NATURAL BRASS OR COPPER PLATED.
SIZES AVAILABLE: 10MM, 12MM, 16MM, 25MM, 35MM, 50MM, 70MM, 95MM, 120MM.

BRASS FLEXIBLE ADAPTORS
AVAILABLE IN BOTH MALE AND FEMALE.
SIZES AVAILABLE: M16 TO M50 AND 5/8" TO 2"

 
Back